The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Connect the included hose to your air supply and these blowguns are ready to use.

The extra length lets you access hard-to-reach areas.

The lightweight plastic body is more comfortable to hold than metal.

These guns include a rubber tip that won't damage your workpiece.

Increase your reach with the telescoping nozzle.

These blowguns provide more than two times the airflow of standard guns.

The flat nozzle distributes air over a wide area.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Attach to your blowgun to direct airflow.

The extra length allows access into hard-to-reach areas.

These needle-style nozzles force air to a precise pinpoint.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Often used for simultaneously spot cooling and blowing parts, these nozzles cool compressed air without electricity or refrigerants.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Turn your blowgun into a scraper to remove and blow away debris at the same time.

Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.

These vacuum cleaners are grounded and prevent buildup from electrostatic discharge that can damage sensitive electronic equipment.

This vacuum/blower is the most powerful hand-held option for dry pickup.

The flexible hose provides access to blind holes in tanks, bins, and barrels.

Clean without the hassle of a cord.